产品特点:

已通过CE认证。

改变了齿轮运转速比，选用大功率电机，大大提高了工作效率。

80%的自产零部件，更好的控制产品质量和成本。

优质铜线绕组，良好的导电性和绝缘性。

电源线和控制手柄线采用优质橡胶护套，耐高温、低温，环保且抗老化。

电机绝缘等级B级，保护等级IP40。

高精度减速箱斜齿齿轮设计，大大降低工作噪音。

高强度工程塑料部件，耐油、耐腐蚀、安全可靠。

工作等级 S3-25%-10min。

优质钢丝绳，柔韧性好，不松散。拉伸强度大于1770N/mm2。

每台产品均经过整机实验，保证产品的质量一致性。

每天超过1000台整机的生产能力，保证及时的交货。

上限位装置设计，防止电机反转和发生碰撞。

性能良好的磅磁刹车装置，通过72小时的连续全负荷测试，提升重物不滑落。

可选配无线遥控装置和葫芦支架。

Product features:

Has passed CE certification.

Changing the gear ratio, the use of high power motor, greatly improving the work efficiency.

80% of the produced parts, better product quality and cost control.

High quality copper wire winding, good electrical conductivity and insulation.

The power cord and the control handle are made of high quality rubber sheath, which is resistant to high temperature, low temperature, environmental protection and anti - aging.

Motor insulation class B, protection class IP40.

The design of the high precision reducer helical gear, greatly reducing the working noise.

High strength engineering plastic parts, oil resistance, corrosion resistance, safe and reliable.

Job level S3-25%-10min.

High quality steel wire rope, good flexibility, not loose. The tensile strength is more than 1770N/mm -.

Each product is passed through the whole experiment, to ensure the quality of the product.

More than 1000 sets of machine production capacity, to ensure timely delivery.

Upper limit device design, to prevent motor reverse and collision.

Good performance of the pound magnetic brake device, through 72 hours of continuous full load test, to enhance the weight does not fall.

Optional wireless remote control device and hoist bracket.